Mazda CX-5 Service & Repair Manual: Doors/Lids & Hood/Trunk

Body

...

Door Adjustment

1. Measure the gap and height difference between the door and the body. 2. Loosen the door hinge installation bolts and adjust the door. Standard clearance a: 2.8?3.8 mm {0.12?0.14 in} ...

Other materials:

Evaporator
Purpose The evaporator cools the passing air. Function The evaporator vaporizes the atomized refrigerant flowing internally, and the air passing through the evaporator is cooled by the release of latent heat. The moisture in the air is condensed at this time and dehumidifie ...

Ignition Switch
Push Button Start Positions The system operates only when the driver is in the vehicle or within operational range while the key is being carried. Each time the push button start is pressed, the ignition switches in the order of off, ACC, and ON. Pressing the push button start again from ON sw ...

Rear Wheel Hub Bolt Replacement
1. Remove the brake calliper component and suspend it out of the way using a cable. 2. Remove the disc plate. 3. Remove the wheel hub bolt using the SST as shown in the figure. 4. Place a new wheel hub bolt in the wheel hub. 5. Install the wheel hub by placing a proper sized washer o ...