Mazda CX-5 Service & Repair Manual: HVAC

Oil Pressure Switch [Fw6 A EL, Fw6 Ax EL]

Purpose/Function The oil pressure switch detects the engagement pressures of the low clutch, 2-6 brake, R-3-5 brake, and the high clutch. The oil pressure switch signal is used for a ...

General

...

Other materials:

Airflow Mode Control [Full Auto Air Conditioner]
Purpose The airflow mode control changes the airflow mode according to the vehicle environment. Function The airflow mode control drives the airflow mode actuator according to the mode switch, defroster switch, and the vehicle environment and switches the position of the ...

Center Accessory Socket Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the upper console.. 3. Insert a tape-wrapped flathead screwdriver into the gap between the cap tab and socket. 4. Move the flathead screwdriver in the direction of the arrow (1) shown in the figure, press the center accessory socket ...

Mass Air Flow (MAF) Sensor/Intake Air Temperature (Iat) Sensor No.1 Removal/Installation
NOTE: Because the IAT sensor No.1 is integrated in the MAF sensor, replacing the IAT sensor No.1 includes replacement of the MAF sensor/IAT sensor No.1. 1. Disconnect the negative battery cable.. 2. Disconnect the MAF sensor/IAT sensor No.1 connector. 3. Remove the MAF sensor/IA ...