Mazda CX-5 Service & Repair Manual: Sensors, Switches, Relays

Evaporator Temperature Sensor [Manual Air Conditioner]

Purpose The evaporator temperature sensor detects the airflow temperature passing through the evaporator. Function The evaporator temperature sensor converts the detected temper ...

Ambient Temperature Sensor Inspection [Full Auto Air Conditioner]

1. Measure the temperature around the ambient temperature sensor and measure the resistance between the ambient temperature sensor terminal. If the characteristics of the ambient tempera ...

Other materials:

Rear Bumper Reinforcement Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Rear splash shield. b. Rear combination light. c. Rear bumper. 3. Remove the hanger rubber in the direction of the arrow (1) shown in the figure. 4. Remove nuts. CAUTION: Removing the rear bumper ...

Rear Seat Back Striker Removal/Installation
1. Disconnect the negative battery cable.. 2. Press the push knob to fold the rear seat back. 3. Remove the following parts: a. Trunk board. b. Trunk end trim. c. Rear scuff plate. d. Trunk side trim. 4. Remove the bolts. 5. Remove the rear seat back striker. 6. Install in the ...

Mass Air Flow (MAF) Sensor
Purpose/Function Detects the intake airflow amount introduced into the cylinder as basic information for mainly determining the fuel injection amount. Detects the intake airflow amount introduced into the cylinder and inputs it to the PCM as an intake airflow amount signal. ...