Mazda CX-5 Service & Repair Manual: Cooling

Mass Air Flow (MAF) Sensor/Intake Air Temperature (Iat) Sensor No.1 Removal/Installation

NOTE: Because the IAT sensor No.1 is integrated in the MAF sensor, replacing the IAT sensor No.1 includes replacement of the MAF sensor/IAT sensor No.1. 1. Disconnect the negative bat ...

Coolant Reserve Tank Removal/Installation

1. Remove in the order indicated in the table. 2. Install in the reverse order of removal. 1 Wiring harness 2 Hose 3 ...

Other materials:

Drive Belt [Skyactiv G 2.0]
Purpose, Function The drive belt transmits rotation force of the crankshaft pulley to the pulley for the auxiliary parts. Construction The drive belt is installed to the front of the engine. A V-ribbed belt has been adopted for the drive belt. The wat ...

Battery Recharging [Skyactiv G 2.0]
Using GR8-1291: (See GR8-1291 INSTANT TRAINING MODULE (VIDEO).) WARNING: Keep all flames away from the battery, otherwise evaporated gas from the battery fluid may catch fire and cause serious injury. 1. Remove the battery filler caps and check the water level. If necessary, add ...

Cooling Fan Relay [Skyactiv G 2.0]
Purpose, Function The cooling fan relay operates by receiving the signal from the PCM to supply power to the cooling fan motor. Construction The cooling fan relay is installed on the relay and fuse block. Operation The contact point is on when the battery vo ...