Mazda CX-5 Service & Repair Manual: Wipers

Washer Fluid Level Sensor Removal/Installation

1. Disconnect the negative battery cable.. 2. Set the front over fender aside.. 3. Set the mudguard (RH) aside.. 4. Remove the front bumper.. 5. Disconnect the washer fluid-level sensor connec ...

Auto Wiper System

Outline The auto wiper system detects the amount of rainfall on the windshield and automatically operates the windshield wipers intermittently or at low/high speed and stops. Using the se ...

Other materials:

Engine Tune Up
Engine Tune-up Preparation NOTE: If the accelerator pedal is depressed continuously for a specified time, the engine speed may decrease to the idle speed. This is due to the fuel cut control operation, which prevents overheating, and it does not indicate a malfunction. The engine s ...

Brake Fluid Pressure Sensor
Purpose/Function The brake fluid pressure sensor detects the fluid pressure from the master cylinder and transmits it to the DSC HU/CM. Construction The brake fluid pressure sensor is built into the DSC HU/CM. Therefore if there is any malfunction of the brake fluid pressur ...

Exterior Care
The paintwork on your Mazda represents the latest technical developments in composition and methods of application. Environmental hazards, however, can harm the paint's protective properties, if proper care is not taken. Here are some examples of possible damage, with tips on how to preven ...