Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Lighting System Personalization

Mazda CX-5 Service & Repair Manual / Body / Lighting & Horn / General / Lighting System Personalization

Turn Light System

Using Mazda Modular Diagnostic System (M-MDS)


Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

3-Flash Turn Signal.

The turn light system can be switched between operable and inoperable.

OFF

Not Adopted. / OFF / ON

Rear body control module (RBCM)


Using audio unit (with color LCD)


Audio unit display

Function

Initial setting

Setting contents

Control module

3-Flash Turn Signal

The turn light system can be switched between operable and inoperable.

Off

On / Off

Rear body control module (RBCM)


Auto Light System

Using Mazda Modular Diagnostic System (M-MDS)


Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Auto-headlight On.

Auto light sensor sensitivity can be changed.

Medium

Not Adopted. / Dark / Medium Dark / Medium/Medium Light / Light

Rear body control module (RBCM)


Using audio unit (with color LCD)


Audio unit display

Function

Initial setting

Setting contents

Control module

Auto-headlight On

Auto light sensor sensitivity can be changed.

Medium

Light / Medium Light / Medium / Medium Dark / Dark

Rear body control module (RBCM)


NOTE:


Setting contents

Illumination operation

Lights off operation

TNS ON

TNS OFF

Headlights (LO) ON

Headlights (LO) OFF

Light

4000 lux

8000 lux

Medium Light

3000 lux

6000 lux

Medium

2000 lux

4000 lux

Medium Dark

1000 lux

2000 lux

Dark

500 lux

1000 lux


Auto Light OFF System

Using Mazda Modular Diagnostic System (M-MDS)


Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Headlight Off Timer.

The headlight emitted time of the auto light off timer can be changed.

30 seconds.

Not Adopted. / 0 seconds. / 30 seconds. / 60 seconds. / 90 seconds. / 120 seconds.

Rear body control module (RBCM)


Using audio unit (with color LCD)


Audio unit display

Function

Initial setting

Setting contents

Control module

Headlight Off Timer

The headlight emitted time of the auto light off timer can be changed.

30 seconds.

120 seconds. / 90 seconds. / 60 seconds. / 30 seconds. / 0 seconds.

Rear body control module (RBCM)


Room Light Control System

Using Mazda Modular Diagnostic System (M-MDS)


Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Interior Light Timeout-Door Open.

The front/rear map light illumination time after any door is open can be changed.

30 minutes.

Not Adopted. / 30 minutes. / 60 minutes. / 10 minutes.

Rear body control module (RBCM)

Interior Light Timeout-Door Closed.

The front/rear map light illumination time after any door is open can be changed.

15 seconds.

Not Adopted. / 15 seconds. / 7.5 seconds. / 30 seconds. / 60 seconds.

Rear body control module (RBCM)


Using audio unit (with color LCD)


Audio unit display

Function

Initial setting

Setting contents

Control module

Interior Light Timeout - Door Open

The front/rear map light illumination time after any door is open can be changed.

30 minutes

60 minutes / 30 minutes / 10 minutes

Rear body control module (RBCM)

Interior Light Timeout - Door Closed

The front/rear map light illumination time after any door is closed can be changed.

15 seconds

60 seconds / 30 seconds/15 seconds / 7.5 seconds

Rear body control module (RBCM)


DRL System (Except canada specs.)

NOTE:


Function

Initial setting

Setting contents

Control unit

The DRL system Function can be set.

ON (DRL illumination)

OFF (DRL non-illumination)/ON (DRL illumination)

Front body control module (FBCM)


Cargo Compartment Light Removal/Installation
1. Disconnect the negative battery cable.. 2. To prevent scratches or damage, affix protective tape to the position shown in the figure. CAUTION: If a flathead screwdriver is inserted in ...

Lighting System Personalization Features Setting Procedure
Turn Light System There are two methods for personalizing the turn light system: One using the M-MDS and the other using the audio unit (with color LCD). Refer to the following and perfor ...

Other materials:

Solar Radiation Sensor Inspection [Full Auto Air Conditioner]
1. Shine a fluorescent light or expose the solar radiation sensor to natural sunlight. 2. Connect the positive (+) lead to terminals B, C and negative (-) lead to terminal A of the solar radiation sensor, and verify that the voltage value is output. If the voltage is 0 V, replace ...

Safety precautions
Explanation of warning symbols: Observe all warnings - there is a risk for injury!   Always follow the instructions in the operating manual. Electrolyte fluid is highly corrosive. Always wear protective gloves and eye protection. First aid: if electrolyte fluid enters the eyes, immediatel ...

D Pillar Speaker Inspection
D-pillar speaker 1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Trunk board. b. Trunk end trim. c. Rear scuff plate. d. Trunk side trim. e. D-pillar trim. 3. Disconnect the D-pillar speaker connector.. 4. Verify that the resistance between the D-pillar ...

© 2016-2023 Copyright www.mcx5.org