Mazda CX-5 Service & Repair Manual: Fuel System
Purpose, Outline
-
A multiple hole type fuel injector has been adopted which provides higher fuel injection accuracy for improved fuel efficiency and output.
-
Piston movement-compression by the 4-head cam inside the high pressure fuel pump heightens the fuel pressure, achieving improved fuel efficiency and output.
Structural View
Engine compartment side
Fuel tank side
U.S.A. and CANADA (2WD)
U.S.A. and CANADA (AWD)
Except U.S.A. and CANADA (2WD)
Except U.S.A. and CANADA (AWD)
System Diagram
Structure
-
The fuel system consists of the following parts:
|
Part/System name |
Reference |
|
|
Return-less fuel system (See RETURNLESS FUEL SYSTEM [SKYACTIV-G 2.0].) |
Fuel pump unit |
(See FUEL PUMP UNIT [SKYACTIV-G 2.0].) |
|
Direct fuel injection system (See DIRECT FUEL INJECTION SYSTEM [SKYACTIV-G 2.0].) |
High pressure fuel pump |
(See HIGH PRESSURE FUEL PUMP [SKYACTIV-G 2.0].) |
|
Fuel distributor |
(See FUEL DISTRIBUTOR [SKYACTIV-G 2.0].) |
|
|
Fuel injector |
(See FUEL INJECTOR [SKYACTIV-G 2.0].) |
|
|
Fuel tank |
(See FUEL TANK [SKYACTIV-G 2.0].) |
|
|
Non-return valve |
(See NON-RETURN VALVE [SKYACTIV-G 2.0].) |
|
|
Fuel pump relay |
(See FUEL PUMP RELAY [SKYACTIV-G 2.0].) |
|
|
Fuel injector relay |
(See FUEL INJECTOR RELAY [SKYACTIV-G 2.0].) |
|
|
Fuel pump control module |
(See FUEL PUMP CONTROL MODULE [SKYACTIV-G 2.0].) |
|
|
Quick connector (fuel system) |
(See QUICK RELEASE (FUEL SYSTEM) CONNECTOR [SKYACTIV-G 2.0].) |
|
Specification
|
Item |
Specification |
||
|
Fuel injector |
Type |
High resistance |
|
|
Fuel supply method |
Top-feed |
||
|
Drive types |
Electronic |
||
|
Pressure regulator control pressure |
(kPa {kgf/cm2, psi}) |
Approx. 430 {4.38, 62.4} |
|
|
Fuel pump type |
Electric |
||
|
Fuel tank capacity |
(L {US gal, Imp gal}) |
2WD |
56.0 {14.8, 12.3} |
|
AWD |
58.0 {15.3, 12.8} |
||
Fuel type
|
Fuel |
Octane Rating* (Anti-knock index) |
|
Regular unleaded fuel |
87 [(R+M)/2 method] or above (91 RON or above) |
* U.S. federal law requires that octane ratings be posted on gasoline station pumps.
Fuel Shut Off Valve
U.S.A. And CANADA
Purpose, function
Prevents fuel from flowing to the charcoal canister during tight turns or
vehicle rollover.
Releases evaporative gas to the charcoal canister.
...
Fuel Tank Inspection
WARNING:
Fuel is very flammable liquid. If fuel spills or leaks from the pressurized
fuel system, it will cause serious injury or death and facility breakage. Fuel
can also irritate skin ...
Other materials:
Engine Coolant Temperature (ECT) Sensor
Purpose/Function
Detects the ECT as basic information for mainly determining the fuel injection
amount.
Detects the ECT and inputs it to the PCM as an ECT signal.
The ECT sensor No.2 is only used for OBD.
Construction
ECT sensor No.1
Installed to the water out ...
Rear Center Seat Belt Removal/Installation
CAUTION:
The ELR (emergency locking retractor) has a spring that will unwind if the
retractor cover is removed. The spring cannot be rewound by hand. If this occurs,
the ELR will not work properly. Therefore, do not disassemble the retractor.
1. Press the release switch, then dis ...
Tie Rod End Replacement
1. Remove the snap pin.
2. Loosen the tie-rod end locknut.
3. Detach the tie-rod end from the steering knuckle using the SST.
4. Remove the tie-rod end locknut.
5. Place alignment marks as shown in the figure for proper installation.
6. Remove the tie-rod end.
7. Align th ...
