Mazda CX-5 Service & Repair Manual: Tire Pressure Monitoring System Warning Light
Purpose, Function
-
The tire pressure monitoring system warning light notifies the driver that it was determined that a tire pressure has decreased below the specified value based on the initialization.
-
The tire pressure monitoring system warning light notifies the driver that a malfunction has occurred in the tire pressure monitoring system.
Construction, Operation
-
The tire pressure monitoring system warning light is built into the instrument cluster.
-
The tire pressure monitoring system warning light illuminates/flashes based on the DSC HU/CM command.
-
The tire pressure monitoring system warning light illuminates if a tire pressure decreases below the specified value based on the initialization.
-
The tire pressure monitoring system warning light flashes for 1 min if a malfunction is detected in the tire pressure monitoring system, and then it illuminates.
-
If the tire pressure monitoring system warning light has illuminated, it will turn off by performing the initialization. If the initialization is not performed, the light will illuminate again when the ignition is switched from off to ON.
Fail-safe
-
Function not equipped.
Tire Pressure Monitoring System Set Switch Removal/Installation
NOTE:
The tire pressure monitoring system (TPMS) set switch is integrated with
the cluster switch.
Refer to SWITCH PANEL REMOVAL/INSTALLATION to remove the cluster switch.
...
Tire Pressure Warning Alarm
Purpose
The tire pressure warning alarm warns the user that a tire pressure has decreased
or notifies the user that the tire pressure warning alarm has been reset.
Function
...
Other materials:
Front Seat Rail Guide Cover Removal/Installation
WARNING:
Handling a side air bag improperly can accidentally operate (deploy) the
air bag, which may seriously injure you. Read the service warnings/cautions
in the Workshop Manual before handling the front seat (side air bag integrated)..
If the sliding mechanisms on both side ...
Shift Control Module Removal/Installation [C66 M R]
Removal
1. Shift the shift lever to the neutral position.
2. Remove the plug hole plate..
3. Disconnect the negative battery cable..
4. Remove the air cleaner and air hose as a single unit..
5. Remove the battery and battery tray..
6. Disconnect the control cable from the transaxle.
a. ...
Oil Pump [Fw6 A EL, Fw6 Ax EL]
Purpose/Function
The oil pump generates hydraulic pressure in the oil line of the automatic
transaxle together with supplying lubrication to powertrain related parts.
Construction
The oil pump has adopted a gear type with built-in outer and inner rotors.
The inner roto ...
