Mazda CX-5 Service & Repair Manual: Shift Control Module Removal/Installation [C66 M R]

Mazda CX-5 Service & Repair Manual / Drivetrain / Transmission/Transaxle / Manual / Shift Control Module Removal/Installation [C66 M R]

Removal

1. Shift the shift lever to the neutral position.

2. Remove the plug hole plate..

3. Disconnect the negative battery cable..

4. Remove the air cleaner and air hose as a single unit..

5. Remove the battery and battery tray..

6. Disconnect the control cable from the transaxle.

a. Pull the lock pin in the direction of the arrow shown in the figure and release the control cable end lock.

b. Press the tabs on the control cable and disconnect the control cable from the bracket on the transaxle.

7. Remove the neutral switch in the order shown in the figure

1	Connector
2	Neutral switch
3	Gasket

8. Remove the detent ball pin in the order shown in the figure

1	Plug
2	Gasket
3	Spring
4	Detent ball pin

9. Remove the back-up light switch in the order shown in the figure

1	Connector
2	Back-up light switch
3	Gasket

10. Remove the shift control module in the order shown in the figure

1	Breather
2	Shift control module
3	O-ring

Installation

1. Verify that the shift control module is in the neutral position.

NOTE:

If the shift control module is in the neutral position, the shift lever with the weight can be moved up and down to a large extent.

2. Install the shift control module in the order shown in the figure

1	O-ring
2	Shift control module
3	Breather

3. Install the back-up light switch in the order shown in the figure

1	Gasket
2	Back-up light switch
3	Connector

4. Install the detent ball pin in the order shown in the figure

1	Detent ball pin
2	Spring
3	Gasket
4	Plug

5. Install the neutral switch in the order shown in the figure

1	Gasket
2	Neutral switch
3	Connector

6. Connect the control cable to the transaxle.

7. Make sure that the shift lever can be shifted smoothly.

8. Install the battery tray and battery..

9. Install the air cleaner and air hose as a single unit..

10. Connect the negative battery cable..

11. Install the plug hole plate..

Shift And Select Mechanism [C66 M R]

Purpose, Function The shift and select mechanism moves the shift fork to change gears according to the operation of the shift lever in the cabin. Construction Shift control module ...

Synchronizer Mechanism [C66 M R]

Purpose, Function For smooth gear changes, the synchronizer mechanism synchronizes the rotation of the engaging area and engages gears. Construction Detent ball-type synchronizer ...

Other materials:

Location of the Tire Label (Placard)
You will find the tire label containing tire inflation pressure by tire size and other important information on the driver's side B-pillar or on the edge of the driver's door frame. SAMPLE Recommended Tire Inflation Pressure On the tire label you will find the recommended tire infla ...

Passenger Side Air Bag Module Removal/Installation [Two Step Deployment Control System]
WARNING: Handling the air bag module improperly can accidentally deploy the air bag module, which may seriously injure you. Read the air bag system service warnings and cautions before handling the air bag module.. Due to the adoption of 2-step deployment control in the passeng ...

Clock Spring Removal/Installation [Standard Deployment Control System]
CAUTION: If the disc on the combination switch is deformed or has foreign material adhering to it, performance of the steering angle sensor may be reduced, causing abnormal operation. When handling the clock spring, be careful not to deform the disc and make sure there is no foreign ...