Mazda CX-5 Service & Repair Manual: Air Cleaner
Purpose, Function
-
Prevents engine internal damage caused by penetration of dust or foreign material.
Construction
-
The air cleaner is installed in front of the battery.
-
The air cleaner consists of the air cleaner case, air cleaner cover, and air cleaner element.
-
Non-woven fabric (dry type) air cleaner element has been adopted to remove dust and foreign material in the intake air.
Air Cleaner Element Removal/Installation
1. Remove the air cleaner element as shown in the figure.
2. Install in the reverse order of removal. ...
Air Filter
Purpose
The air filter removes pollen and dust in the intake air and purifies air
flowing into the cabin.
Function
The air filter removes pollen and dust using a dust collecting ...
Other materials:
Essential Information
Introduction
Be extremely careful and prevent injury to yourself and others or damage to your
vehicle when using this manual for inspection and maintenance.
If you are unsure about any procedure it describes, we strongly urge you to have
a reliable and qualified service shop perform the work ...
Side Air Bag Sensor [Standard Deployment Control System]
Purpose
The side air bag sensor detects an impact during a lateral collision.
Function
The side air bag sensor converts the detected impact to an electrical signal.
Construction
The side air bag sensor is built into the crash sensor.
Two side air bag sensors ...
ABS Control
Outline
ABS control occurs when wheel slip is determined by the DSC CM (based on
the four ABS wheel-speed sensors). Then, the DSC HU inlet and outlet solenoid
valves are operated and brake fluid pressure is controlled accordingly to prevent
wheel lock-up.
Feature
Use of ...
