Mazda CX-5 Service & Repair Manual: Tire Pressure Monitoring System Set Switch
Purpose
-
The tire pressure monitoring system set switch is used to initialize the tire pressure monitoring system.
Construction, Operation
-
The tire pressure monitoring system set switch is installed to the instrument panel.
-
The tire pressure monitoring system set switch has adopted a monitoring type switch.
-
The tire pressure monitoring system set switch sends a tire pressure monitoring system initialization signal to the instrument cluster.
Fail-safe
|
DTC |
Fail-safe |
|
C1031:35 |
Inhibits the TPMS control. |
Tire Pressure Monitoring System Initialization Procedure
Perform the tire pressure monitoring system initialization when the following
operations have been performed:
Tire pressures have been adjusted
Tires or wheels have ...
Tire Pressure Monitoring System Set Switch Inspection
1. Remove the TPMS set switch..
2. Verify that the resistance between the TPMS set switch terminals B and C is
as indicated in the table.
If not as indicated in the table, replace the TP ...
Other materials:
Transaxle Range Sensor [Fw6 A EL, Fw6 Ax EL]
Purpose/Function
The transaxle range sensor detects the position of the manual valve and selector
lever.
The transaxle range sensor signal is used for automatic shift control, manual
shift control, TCC control, line pressure control, direct electric shift control,
learning co ...
DSC HU/CM Removal/Installation
WARNING:
If the DSC HU/CM configuration is not completed, it could result in an unexpected
accident due to the DSC being inoperative. If the DSC HU/CM is replaced, always
use the automatic configuration function so that the DSC operation conditions
are correct.
If the DSC re ...
Front Door Latch Switch
Purpose, Function
Switches on/off in conjunction with the latch lever rotation, and detects
the front door open/closed condition by the voltage which is changed by the
rear body control module (RBCM).
Construction
The switch is turned on/off by the rotation of the latch lev ...
