Purpose, Function
Switches on/off in conjunction with the latch lever rotation, and detects the front door open/closed condition by the voltage which is changed by the rear body control module (RBCM).
Construction
The switch is turned on/off by the rotation of the latch lever.
When the front door is completely opened, the front door latch switch turns on (contact point: Closed).
Operation
Door open (unlatch) operation
1. When the inner or outer handle is operated, the door opens, the latch lever is in an unlatched condition, and the front door latch switch turns on.
Door closed (latched) operation
1. When a door is closed, the front door lock striker enters the latch lever groove.
2. When the door is further closed, the latch lever is pressed by the front door lock striker and it rotates.
3. When the door is completely closed, the latch lever is in a latched condition, the front door latch switch turns off.
Fail-safe
Function not equipped.
Compression Inspection
WARNING:
Hot engines and oil can cause severe burns. Be careful not to burn yourself
during removal/installation of each component.
Fuel vapor is hazardous. It can very easily ignite, causing serious injury
and damage. Always keep sparks and flames away from fuel.
Fuel ...
Shroud Panel Removal/Installation
CAUTION:
Since the servicing is performed with the hood open, secure the hood using
a piece of wood to prevent it from falling.
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Seal board upper.
b. Front bumper.
c. Front combination light.
d. Sh ...
Clock Spring Removal/Installation [Two Step Deployment Control System]
CAUTION:
If the disc on the combination switch is deformed or has foreign material
adhering to it, performance of the steering angle sensor may be reduced, causing
abnormal operation. When handling the clock spring, be careful not to deform
the disc and make sure there is no foreign ...