1. Park the vehicle on level ground.
2. Remove the front under cover No.2..
3. Remove the drain plug and gasket, and drain the manual transaxle oil.

4. Install a new gasket and the drain plug.
39—59 N·m {4.0—6.0 kgf·m, 29—43 ft·lbf}
5. Remove the oil level plug and gasket.

6. Add the specified manual transaxle oil through the oil level plug port.
API service GL-4
SAE 75W-80
1.65 L {1.74 US qt, 1.45 lmp qt}
7. Install a new gasket and the oil level plug.
39—59 N·m {4.0—6.0 kgf·m, 29—43 ft·lbf}
8. Install the front under cover No.2..
Manual Transaxle Oil Inspection [C66 M R]
Manual Transaxle Removal/Installation [C66 M R]Rear Bumper Reinforcement Removal/Installation
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Rear splash shield.
b. Rear combination light.
c. Rear bumper.
3. Remove the hanger rubber in the direction of the arrow (1) shown in the figure.
4. Remove nuts.
CAUTION:
Removing the rear bumper ...
Seat Precaution
WARNING
Make sure the adjustable components of a seat are locked in place:
Adjustable seats and seatbacks that are not securely locked are dangerous. In a
sudden stop or collision, the seat or seatback could move, causing injury. Make
sure the adjustable components of the seat are locked in pl ...
Rear Combination Light
Purpose
The rear combination lights are used to signal the following conditions to
vehicles/people at the rear.
Rear turn lights: Signals a left or right turn of the vehicle.
Brake lights: Signals a vehicle stop.
Taillights: Signals the presence of the ve ...