Mazda CX-5 Service & Repair Manual: Fuel Tank
Purpose, Function
-
Store fuel safely and supply fuel to the engine.
Construction
U.S.A. and CANADA
-
The fuel tank is installed below the rear seat.
2WD
AWD
-
The fuel tank is made of steel.
-
The following parts are integrated in the fuel tank.
-
Non-return valve
(See NON-RETURN VALVE [SKYACTIV-G 2.0].)
-
Rollover valve
(See ROLLOVER VALVE [SKYACTIV-G 2.0].)
-
Fuel shut-off valve
(See FUEL SHUT-OFF VALVE [SKYACTIV-G 2.0].)
2WD
AWD
Except U.S.A. and CANADA
-
The fuel tank is installed below the rear seat.
2WD
AWD
-
The fuel tank is made of steel.
-
The following parts are integrated in the fuel tank.
-
Non-return valve
(See NON-RETURN VALVE [SKYACTIV-G 2.0].)
-
Rollover valve
(See ROLLOVER VALVE [SKYACTIV-G 2.0].)
2WD
AWD
Fuel Tank Removal/Installation
WARNING:
Fuel is very flammable liquid. If fuel spills or leaks from the pressurized
fuel system, it will cause serious injury or death and facility breakage. Fuel
can also irritate skin ...
High Pressure Fuel Pump Control
Outline
Changes the fuel pressure applied to the fuel injector according to engine
operation conditions to improve engine output and startability.
The PCM determines the fuel pressur ...
Other materials:
Fuses
Your vehicle's electrical system is protected by fuses.
If any lights, accessories, or controls do not work, inspect the appropriate
circuit protector. If a fuse has blown, the inside element will be melted.
If the same fuse blows again, avoid using that system and consult an Authorized
Ma ...
Drive Belt
Purpose, Function
The drive belt transmits rotation force of the crankshaft pulley to the pulley
for the auxiliary parts.
Construction
The drive belt is installed to the front of the engine.
A V-ribbed belt has been adopted for the drive belt.
The wat ...
Washer Motor Removal/Installation
1. Disconnect the negative battery cable..
2. Set the front over fender aside..
3. Set the mudguard (RH) aside..
4. Remove the front bumper..
5. Disconnect the washer motor connector from the washer motor.
6. Disconnect the windshield washer hose from the washer motor.
7. Disconnect the ...
