Mazda CX-5 Service & Repair Manual: Fuel Pressure Sensor

Mazda CX-5 Service & Repair Manual / Engine / Fuel / Fuel Pressure Sensor

Purpose/Function

Detects the fuel pressure in the fuel distributor as basic information for mainly determining the fuel injection amount.
Detects the fuel pressure in the fuel distributor and inputs it to the PCM as a fuel pressure signal.

Construction

Installed on the fuel distributor.
A metal diaphragm thin film distortion gauge has been adopted as the detecting element for detecting the fuel pressure.

Operation

Inputs the signal, which fluctuates according to the fuel pressure, to the PCM.

Fuel pressure sensor characteristic

Fail-safe


DTC No.	Fail-safe function
P0191:00	Stops the high pressure fuel pump control. Limits the intake air amount.
P0192:00	Stops the high pressure fuel pump control. Limits the intake air amount.
P0193:00	Stops the high pressure fuel pump control. Limits the intake air amount.

Fuel Pressure Sensor Inspection

Voltage Inspection NOTE: The fuel pressure sensor cannot be removed as a single unit. When replacing the fuel pressure sensor, replace it together with the fuel distributor as a single ...

Fuel Pump Relay

Purpose, Function Controls the fuel pump on/off according to control signals from the PCM. The fuel pump is operated only at engine start or when the engine is running to improve saf ...

Other materials:

Front Fender Junction Installation [Panel Replacement]
Symbol Mark Installation Procedure 1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions. 2. Drill holes for the plug welding before installing the new parts. 3. After temporarily installing new parts, make sure the related parts fit p ...

Pressure Sensor Removal/Installation [Two Step Deployment Control System]
WARNING: Handling the pressure sensor improperly can accidentally operate (deploy) the air bag module, which may seriously injure you. Read the air bag system service warnings and cautions before handling the pressure sensor.. 1. Switch the ignition to off. 2. Disconnect the ne ...

Evaporative Emission (Evap) Control System
Purpose, Outline Prevents release of evaporative gas into the atmosphere. The intake manifold vacuum introduces evaporative gas to the intake manifold via the charcoal canister and the purge solenoid valve. System Diagram U.S.A. and CANADA Except U.S.A. and CANADA ...