Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Dashboard Under Cover Removal/Installation

Mazda CX-5 Service & Repair Manual / Body / Body Interior / General / Dashboard Under Cover Removal/Installation

1. Detach hooks A in the direction of arrow (1) shown in the figure.


2. Pull the dashboard under cover in the direction of arrow (2) while detaching pins B.

3. Remove the dashboard under cover in the direction of the arrow (3) shown in the figure while detaching the guide C.

CAUTION:

4. Install in the reverse order of removal.

Dashboard Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Windshield wiper arm and blade. b. Cowl grille. c. Windshield wiper motor. d. Front scuff plate. e. Front side ...

Decoration Panel Removal/Installation
CAUTION: Affix protective tape to the position shown in the figure. 1. Disconnect the negative battery cable.. 2. Open the glove compartment. 3. Insert a tape-wrapped flathead ...

Other materials:

Intake Manifold Vacuum Inspection
1. Disconnect the evaporative hose No.3 (purge solenoid valve side) and install the vacuum gauge.. 2. Verify that the intake air hoses are installed securely. 3. Warm up the engine. 4. Measure the intake manifold vacuum while idling (no load) using the vacuum gauge. If not within t ...

Ignition Coil [Skyactiv G 2.0]
Purpose, Function The ignition coil generates high voltage by electromagnetic induction to discharge the spark plug. Construction The ignition coil is installed to the upper part of the spark plug (direct ignition coil). With the adoption of the direct ignitio ...

Push Button Start Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the meter hood.. 3. While pressing the push button start tab in the direction of the arrow (1) shown in the figure, push out the push button start in the direction of the arrow (2) shown in the figure to detach the push button start tab fr ...

© 2016-2026 Copyright www.mcx5.org