Mazda CX-5 Service & Repair Manual: Crankshaft Pulley
Purpose, Function
-
The crankshaft pulley transmits the drive force to the auxiliary parts via the drive belt.
-
The crankshaft pulley suppresses torsional vibration of the crankshaft.
Construction
-
The crankshaft pulley is installed to the front of the crankshaft.
-
The crankshaft pulley has a torsional damper for suppressing torsional vibration of the crankshaft.
-
The crankshaft pulley has key groove to match the timing to the crankshaft.
-
The crankshaft pulley has a timing mark indicating the piston position.
Drive Belt Auto Tensioner Inspection
WARNING:
A hot engine can cause severe burns. Turn off the engine and wait until it
is cool before servicing.
CAUTION:
If the rubber part of the drive belt auto tensioner is d ...
Other materials:
Audio Unit Personalization Features Setting Procedure
Door Locks Systems
1. Switch the ignition ON (engine off or on).
2. Turn the audio unit power on.
3. Select the following from the audio unit screen.
a. “Setup”
b. “Vehicle”
c. “Door Locks“
4. Select the following items and change the setting.
Advanced keyless entry system ...
Rear Window Glass Installation
WARNING:
Using a utility knife with bare hands can cause injury. Always wear gloves
when using a utility knife.
CAUTION:
Proper installation of the glass may be difficult if sealant is cracked or
the glass is pushed out by air pressure when a door is opened/closed with al ...
Winter Driving
Carry emergency gear, including tire chains, window scraper, flares, a small
shovel, jumper cables, and a small bag of sand or salt.
Ask an Authorized Mazda Dealer to perform the following precautions: l Have the
proper ratio of antifreeze in the radiator.
• Inspect the battery and its cable ...
