Mazda CX-5 Service & Repair Manual: Wiper/Washer System
Outline
-
The following wiper/washer system has been adopted.
-
Windshield wiper system
-
Rear wiper system
-
Auto wiper system (with auto wiper system)
-
Washer fluid-level sensor (with washer fluid-level sensor)
Specification
-
Windshield wiper system with continuous (low/high), auto-stop, one-touch wiper, intermittent wiper, and synchronized washer and wiper operation adopted.
-
CAN communication has been adopted for the windshield wiper system.
-
Windshield washer nozzles have been adopted in which the area where the washer fluid is sprayed can be adjusted.
-
Rear wiper system with continuous, auto-stop, intermittent wiper, and synchronized washer and wiper operation adopted.
-
CAN communication has been adopted for the rear wiper system.
-
Rear washer nozzle have been adopted in which the area where the washer fluid is sprayed can be adjusted.
-
An auto wiper system adopted which enables fully automatic windshield wiper operation.
-
CAN communication has been adopted for the auto wiper system.
-
A rain sensor integrated with the lens has been adopted which aggregates infrared light to detect the amount of rainfall.
-
Auto wiper system personalization features has been adopted.
-
A washer fluid-level sensor is installed in the washer tank.
|
Item |
With the washer fluid-level sensor |
Without the washer fluid-level sensor |
|
Washer tank capacity |
4.5 L {4.8 US qt, 4.0 Imp qt} |
2.2 L {2.3 US qt, 1.9 Imp qt} |
System Structural View
Windshield Wiper And Washer Switch Inspection
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Column cover.
b. Wiper and washer switch.
3. Use a tester to measure and verify that the continuity between the win ...
Wiper/Washer System Personalization
A customize function has been adopted which switches the auto wiper system
between operable/inoperable.
Using Mazda Modular Diagnostic System (M-MDS)
The auto wiper function can ...
Other materials:
Fresh Air Duct
Purpose, Function
Conducts fresh air from outside the engine compartment.
Increases air density by taking fresh air, which is cooler than the engine
compartment, to enhance the charging efficiency, ensuring the combustion stability.
Construction
The fresh-air duct is i ...
Reduction Gear
Purpose/ Function
The reduction gear transmits the rotation input from the EPS motor, decreasing
the rotation speed and increasing the torque simultaneously.
Construction
The reduction gear consists of the worm wheel located on the steering column
main shaft and the worm sh ...
Front Map Light
Purpose
The front map lights shine light at the front of the vehicle interior.
Function
The front map lights illuminate when the map light switch is turned on.
Illuminates according to the lock condition of the driver's door and open/close
conditions of the doors u ...
