Purpose
The windshield wiper motor transmits rotation force to the windshield wiper link to operate the windshield wiper arms and blades.
Function
The windshield wiper motor operates using the current from the front body control module (FBCM) which is input according to the wiper and washer switch operation, and generates rotation force for the low/high 2 system.
Construction
The windshield wiper motor consists of the following parts:
Motor
Deceleration mechanism
Cam plate
Operation
1. The current flowing from the front body control module (FBCM) is input to the magnet and the motor shaft connected to the armature is rotated.
2. The rotation force of the motor shaft is transmitted to the wheel gear via the worm connected to the motor shaft to drive the windshield wiper link.
3. The windshield wiper link converts the rotation force of the windshield wiper motor to a horizontal reciprocating movement to drive the windshield wiper arms and blades.
4. If the windshield wiper arms and blades are operated to the park position, the auto stop switch turns on by contacting the contact point of the cam plate to stop windshield wiper arms and blades at the park position.
Fail-safe
Function not equipped.
Tire Pressure Monitoring System Set Switch Inspection
1. Remove the TPMS set switch..
2. Verify that the resistance between the TPMS set switch terminals B and C is
as indicated in the table.
If not as indicated in the table, replace the TPMS set switch.
TPMS set switch specification
Terminal
...
Side Air Bag Module Removal/Installation [Standard Deployment Control System]
WARNING:
Handling the air bag module improperly can accidentally operate (deploy)
the air bag module, which may seriously injure you. Read the air bag system
service warnings and cautions before handling the air bag module..
If the side air bag module is installed with debris i ...
Fuel Injection Control System
Outline
Performs optimum fuel injection according to engine operation conditions.
The PCM determines the engine operation conditions based on the signals from
each input device and drives the fuel injectors at the optimal fuel injection
time (fuel injection amount) and the fuel ...