Mazda CX-5 Service & Repair Manual: Windshield Washer Hose Removal/Installation
1. Disconnect the negative battery cable..
2. Remove the front over fender..
3. Remove the mudguard (RH)..
4. Remove the windshield wiper arm and blade..
5. Disconnect the windshield washer hose A from the washer motor.
6. Remove the windshield washer hose A from the washer tank hook.
7. Remove the windshield washer hose A from clips A.
8. Disconnect the windshield washer hose A from the joint pipe A and remove it.
9. Remove the cowl grille..
10. Disconnect the windshield washer hose B from the joint pipe A.
11. Disconnect the windshield washer hose B from the joint pipe B and remove it.
12. Disconnect the windshield washer hose C from the windshield washer nozzle A.
13. Disconnect the windshield washer hose C from the joint pipe B and remove it.
14. Disconnect the windshield washer hose D from the joint pipe B.
15. Disconnect the windshield washer hose D from the joint pipe C and remove it.
16. Disconnect the windshield washer hose E from the windshield washer nozzle B.
17. Disconnect the windshield washer hose E from the joint pipe C and remove it.
18. Install in the reverse order of removal.
Washer Tank Removal/Installation
With Washer Fluid-level Sensor
1. Disconnect the negative battery cable..
2. Set the front over fender aside..
3. Set the mudguard (RH) aside..
4. Remove the front bumper..
5. Remove the brac ...
Windshield Washer Nozzle Adjustment
CAUTION:
If the nozzle is adjusted by inserting a stick-like object into the nozzle,
it could deform the injection nozzle and the washer fluid may not spray normally.
When adjusting the ...
Other materials:
Passenger Compartment Temperature Sensor Inspection [Full Auto Air Conditioner]
1. Measure the temperature around the passenger compartment temperature sensor
and measure the resistance between passenger compartment temperature sensor terminals
A and B.
If the characteristics of the passenger compartment temperature sensor are
not as shown in the graph, replace t ...
Non Return Valve
Purpose, Function
Assures safety by preventing fuel from returning to the fuel filler opening.
Construction
The non-return valve cannot be removed as it is installed inside the fuel
tank.
2WD
AWD
A single valve type has been adopted for the non-return v ...
Anticorrosion, Sound Insulation, And Vibration Insulation
Body Sealing
Apply body sealer where necessary.
For locations where application of body sealer is difficult after installation,
apply it before installation.
Application of Undercoating
Apply an undercoat to the required location of the body.
Application ...
