Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Tire Pressure Monitoring System Warning Light

Mazda CX-5 Service & Repair Manual / Suspension / Wheels, Tires / Tire Pressure Monitoring System Warning Light

Purpose, Function

Construction, Operation

Fail-safe

Tire Pressure Monitoring System Set Switch Removal/Installation
NOTE: The tire pressure monitoring system (TPMS) set switch is integrated with the cluster switch. Refer to SWITCH PANEL REMOVAL/INSTALLATION to remove the cluster switch. ...

Tire Pressure Warning Alarm
Purpose The tire pressure warning alarm warns the user that a tire pressure has decreased or notifies the user that the tire pressure warning alarm has been reset. Function ...

Other materials:

Windshield Wipers and Washer
The ignition must be switched ON. WARNING Use only windshield washer fluid or plain water in the reservoir: Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibility, and could result in an accident. Only use wind ...

PID/Data Monitor Inspection [Front Body Control Module (Fbcm)]
1. Connect the M-MDS to the DLC-2. 2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS. a. Select “DataLogger”. b. Select “Modules”. c. Select “F_BCM”. 3. Select the applicable PID from the PID table. 4. Verify the PID ...

Clock Spring Inspection [Two Step Deployment Control System]
1. Disconnect the negative battery cable and wait for 1 min or more.. 2. Remove the driver?side air bag module.. 3. Remove the steering wheel.. 4. Remove the column cover.. 5. Remove the clock spring.. 6. Verify that the continuity is as indicated in the table. If not as indicated ...

© 2016-2022 Copyright www.mcx5.org