Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Throttle Position (TP) Sensor

Mazda CX-5 Service & Repair Manual / Engine / Control / Throttle Position (TP) Sensor

Purpose/Function

Construction

Operation

TP sensor characteristic


Fail-safe


DTC No.

Fail-safe function

P0122:00

  • Restricts the upper limit of the engine speed.

P0123:00

  • Restricts the upper limit of the engine speed.

P0222:00

  • Restricts the upper limit of the engine speed.

P0223:00

  • Restricts the upper limit of the engine speed.

P2101:00

  • Restricts the upper limit of the engine speed.

  • Stops the drive-by-wire control (throttle valve is open at approx. 8° by return spring force).

P2109:00

  • Restricts the upper limit of the engine speed.

  • Stops the drive-by-wire control (throttle valve is open at approx. 8° by return spring force).

P2135:00

  • Restricts the upper limit of the engine speed.

  • Stops the drive-by-wire control (throttle valve is open at approx. 8° by return spring force).


Throttle Position (TP) Sensor Inspection
Voltage Inspection CAUTION: The inspection cannot be performed with this method correctly if there is a malfunction of the APP sensor or throttle valve actuator. Verify that no DTCs rel ...

Accelerator Pedal Position (App) Sensor Inspection
Voltage Inspection NOTE: Because the APP sensor is integrated in the accelerator pedal, replacing the APP sensor includes replacement of the accelerator pedal. 1. Connect the M-MDS t ...

Other materials:

Differential Oil Temperature Sensor Removal/Installation
WARNING: Hot differential oil may cause severe burns. Do not perform maintenance while differential oil is hot. 1. Disconnect the negative battery cable. 2. Disconnect the differential oil temperature sensor connector. 3. Remove the differential oil temperature sensor. 4. ...

Front Body Straight Line Dimensions (1) [Dimensions]
Point symbol Designation Hole diameter or bolt or nut size mm {in} A Cowl panel installation hole ?5 {0.2} B Wiper bracket datum hole ?7 {0.3} C ...

Oil Control Valve (OCV) Inspection [Skyactiv G 2.0]
Coil Resistance Inspection 1. Disconnect the negative battery cable.. 2. Remove the plug hole plate.. 3. Disconnect the OCV connector. 4. Measure the resistance between terminals A and B using an ohmmeter. OCV coil resistance 6.9—7.5 ohms [20°C {68°F}] If ...

© 2016-2024 Copyright www.mcx5.org