Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Sunvisor Removal/Installation

Mazda CX-5 Service & Repair Manual / Body / Body Interior / Amenities / Sunvisor Removal/Installation

1. Disconnect the negative battery cable. (with vanity mirror illumination).

2. Remove the screw A.

3. Rotate the sunvisor in the direction of the arrow.


4. Unhook and remove the sunvisor.

5. Disconnect the vanity mirror illumination connector. (with vanity mirror illumination)

6. Press the center adaptor tabs as shown in the figure using two tape-wrapped flathead screwdrivers, and remove the center adaptor.


7. Install in the reverse order of removal.

Rear Seat Center Armrest Removal/Installation
1. Operate the push knob (RH) and lower the rear seat back (RH). 2. Remove screw A. 3. Remove the rear seat center armrest hinge cover (RH) in the direction of the arrow (1) shown in the fig ...

Lighting & Horn
...

Other materials:

Front Shock Absorber Disposal
WARNING: Whenever drilling into a front shock absorber, wear protective eye wear. The gas in the front shock absorber is pressurized, and could spray metal chips into the eyes and face when drilling. 1. Place the shock absorber on a level surface or with the piston pointing d ...

Spark Plug Removal/Installation [Skyactiv G 2.0]
CAUTION: If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing. 1. Disconnect the negative battery cable.. 2. Remove the plug hole plate.. 3. Remove the ignition coils.. 4. Remove th ...

Clock Spring Inspection [Two Step Deployment Control System]
1. Disconnect the negative battery cable and wait for 1 min or more.. 2. Remove the driver?side air bag module.. 3. Remove the steering wheel.. 4. Remove the column cover.. 5. Remove the clock spring.. 6. Verify that the continuity is as indicated in the table. If not as indicated ...

© 2016-2024 Copyright www.mcx5.org