Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Sunroof Switch Inspection

1. Disconnect the negative battery cable..

2. Remove the front map light..

3. Verify that the continuity between the sunroof switch terminals is as indicated in the table.


Roof - Fixed, Leisure
...

Sunroof Switch Removal/Installation
NOTE: The sunroof switch is together with the front map light. 1. Disconnect the negative battery cable.. 2. Remove the front map light.. 3. Install in the reverse order of removal. ...

Other materials:

Drive Belt Auto Tensioner Inspection
WARNING: A hot engine can cause severe burns. Turn off the engine and wait until it is cool before servicing. CAUTION: If the rubber part of the drive belt auto tensioner is damaged by a screwdriver or other tool, oil in the hydraulic pressure unit could leak and the tens ...

Front Accessory Socket Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the front console.. 3. Insert a tape-wrapped flathead screwdriver into the gap between the cap tab and socket. 4. Move the flathead screwdriver in the direction of the arrow (1) shown in the figure, press the front accessory socket i ...

Steps for Determining the Correct Load Limit
Steps for Determining Correct Load Limit- (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle's placard. (2) Determine the combined weight of the driver and passengers that will be riding in your vehicle. (3) Subt ...

© 2016-2022 Copyright www.mcx5.org