1. Inspect the steering column for excessive play and damage.
2. Verify that the clearance between the projection on the steering column shown in the figure and the bracket is less than 2.0 mm {0.079 in}
.
If the clearance between the projection and bracket is 2.0 mm {0.079 in} or more
, replace the steering column component.
NOTE:
If the clearance between the projection and bracket is 2.0 mm {0.079 in} or more
, the impact absorbing mechanism of the steering column will operate, therefore it is necessary to replace the steering column component.
3. Inspect the tilt/telescope mechanism operation for the following:
a. The adjusting lever moves smoothly from the lock to the unlock position.
b. The steering shaft is fixed firmly when the adjusting lever is locked.
If there is any malfunction, replace the steering column.
Rear Wiper Arm And Blade Removal/Installation
Rear Wiper Arm
1. Pull the cap in the direction of the arrows (1) shown in the figure and remove
it in the direction of the arrow (2) with tabs A, B released.
2. Remove the nut with the rear wiper arm and blade pressed.
3. Raise the rear wiper arm and detach it from the serrated conne ...
Car Navigation System
Outline
The car-navigation system displays point-of-origin and road guidance maps
via the audio unit display and provides guidance and information to the desired
point of destination.
NOTE:
For the car-navigation system operation, refer to the owner's manual.
...
Rear ABS Wheel Speed Sensor Inspection [Awd]
Installation Visual Inspection
1. Inspect the following items:
If there is any malfunction, replace the applicable part.
a. Excessive play of the ABS wheel-speed sensor
b. Deformation of the ABS wheel-speed sensor
c. Deformation or damage of the ABS sensor rotor
Clearance Inspec ...