Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Steering Gear And Linkage Disassembly

Mazda CX-5 Service & Repair Manual / Steering / Linkage, Power / Steering Gear And Linkage Disassembly

CAUTION:

1. Disassemble in the order indicated in the figure.



1

Dust cover

2

O-ring

3

Tie-rod end

(See Tie-rod End Disassembly Note.)

4

Locknut

5

Boot clamp

6

Boot band

(See Boot Band Disassembly Note .)

7

Boot

8

Tie rod

(See Tie Rod Disassembly Note.)

9

Mounting rubber

(See Mounting Rubber Disassembly Note.)

10

Steering gear


Tie-rod End Disassembly Note

1. Place alignment marks as shown in the figure for proper installation.


2. Remove the tie-rod end.

Boot Band Disassembly Note

1. Insert a flathead screwdriver into the boot band as shown in the figure, then press the caulked area outward to remove the boot band.


Tie Rod Disassembly Note

1. Lock the steering rack end (pinion gear side) against rotation with a wrench and remove the tie rod using the suitable wrench.


Mounting Rubber Disassembly Note

1. Remove the mounting rubber from the gear housing using the SSTs

and a press.


Steering Gear And Linkage Assembly
CAUTION: To prevent damage to the steering gear, secure it to the vise using a copper plate or clean cloth. 1. Assemble in the order shown in the figure. 1 ...

Steering Gear And Linkage Inspection
1. Remove the steering gear and linkage.. 2. Remove the tie-rod end and boot.. 3. Measure the rotation torque of the pinion shaft using a crescent wrench and pull scale. (speed measurement refer ...

Other materials:

Door Trim
Purpose/Function The front and rear door trims are equipped with shock absorbing pads for impulse force relief during a collision. Construction Shock absorbing pads are installed inside the front and rear door trims. Shock absorbing pads absorb the impulse force during ...

Front Parking Brake Cable Removal/Installation
1. Remove the front console box.. 2. Remove the shift lever knob. (MTX). 3. Remove the shift panel.. 4. Remove the upper panel.. 5. Remove the rear console.. 6. Remove in the order indicated in the table. 7. Install in the reverse order of removal. 8. After installation, inspect the pa ...

Turn Light System
Purpose The turn light system flashes the turn light three times automatically according to the turn switch operation. The front body control module (FBCM) performs turn light system fail-safe.. Function The front body control module (FBCM) performs control based on th ...

© 2016-2022 Copyright www.mcx5.org