Mazda CX-5 Service & Repair Manual: Sensors, Switches, Relays

Rear ABS Wheel Speed Sensor Removal/Installation

1. Remove the trunk board.. 2. Remove the trunk end trim.. 3. Remove the rear scuff plate.. 4. Remove the trunk side trim.. 5. Disconnect the rear ABS wheel-speed sensor connector. 6. Pr ...

ABS Wheel Speed Sensor And ABS Sensor Rotor

Purpose/Function The ABS wheel-speed sensor and ABS sensor rotor detect the rotation condition of each wheel and transmit this information to the DSC HU/CM. The signal from the ABS w ...

Other materials:

Low Engine Coolant Temperature Indicator Light (Blue)/High Engine Coolant Temperature Warning Light (Red)
Purpose Low engine coolant temperature indicator light (blue) The low engine coolant temperature indicator light (blue) notifies the driver that the engine coolant temperature is low and vaporization of the fuel is difficult. High engine coolant temperature warning light (red) ...

Throttle Position (TP) Sensor Inspection
Voltage Inspection CAUTION: The inspection cannot be performed with this method correctly if there is a malfunction of the APP sensor or throttle valve actuator. Verify that no DTCs related to the APP sensor or throttle valve actuator are stored before the inspection. NOTE: ...

DSC HU/CM Removal/Installation
WARNING: If the DSC HU/CM configuration is not completed, it could result in an unexpected accident due to the DSC being inoperative. If the DSC HU/CM is replaced, always use the automatic configuration function so that the DSC operation conditions are correct. If the DSC re ...