Mazda CX-5 Service & Repair Manual: Sensors, Switches, Relays

Vanity Mirror Illumination Inspection

1. Disconnect the negative battery cable.. 2. Remove the sunvisor.. 3. Verify that the continuity between the vanity mirror illumination terminals is as indicated in the table. I ...

Light Switch Inspection

Light Switch 1. Disconnect the negative battery cable.. 2. Remove the column cover.. 3. Remove the light switch.. 4. Verify that the continuity between the light switch terminals is as indicate ...

Other materials:

Positive Crankcase Ventilation (PCV) Valve
Purpose, Function Prevents release of blow-by gas (unburnt gas) into the atmosphere. The PCV valve is open/closed by the intake manifold vacuum. Construction The PCV valve is installed to the oil separator. The PCV valve consists of a spring and valve. ...

Upper Cowl Side Reinforcement Removal [Panel Replacement]
Symbol Mark Removal Procedure 1. Drill the 13 locations indicated by (A) shown in the figure. 2. Drill the 8 locations indicated by (B) shown in the figure. NOTE: When a drill the 8 locations indicated by (B) shown in the figure, the through hole is not made in consideration of ...

Propeller Shaft Inspection
1. Measure the propeller shaft center runout using the dial gauge. If it exceeds the maximum specification, replace the propeller shaft as a single component. Propeller shaft maximum runout 0.8 mm {0.031 in} 2. Inspect the play and rotation of the joint by turning ...