Mazda CX-5 Service & Repair Manual: Sensors, Switches, Relays

Evaporator Temperature Sensor [Manual Air Conditioner]

Purpose The evaporator temperature sensor detects the airflow temperature passing through the evaporator. Function The evaporator temperature sensor converts the detected temper ...

Ambient Temperature Sensor Inspection [Full Auto Air Conditioner]

1. Measure the temperature around the ambient temperature sensor and measure the resistance between the ambient temperature sensor terminal. If the characteristics of the ambient tempera ...

Other materials:

Front Shock Absorber And Coil Spring Removal/Installation
CAUTION: Performing the following procedures without first removing the front ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if it is pulled by mistake. Before performing the following procedures, disconnect the front ABS wheel-speed sensor wiring ...

Side Step Molding Removal/Installation
1. Set the rear over fender aside.. 2. Insert a tape-wrapped flathead screwdriver shown in the figure and remove the clip A in the direction of arrow (1). 3. Slide the side step molding in the direction of the arrow (2) shown in the figure and remove clips B from side step molding. 4. ...

Cowl Upper Plate Installation [Panel Replacement]
Symbol Mark Installation Procedure 1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions. 2. Drill holes for the plug welding before installing the new parts. 3. After temporarily installing new parts, make sure the related parts fit p ...