Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Sas Control Module Removal/Installation [Standard Deployment Control System]

Mazda CX-5 Service & Repair Manual / Engine / Control / Sas Control Module Removal/Installation [Standard Deployment Control System]

WARNING:

CAUTION:

NOTE:

1. When replacing the SAS control module, perform the configuration..

2. Switch the ignition off.

3. Disconnect the negative battery cable and wait for 1 min or more

..

4. Remove the following parts:

a. Front console box.

b. Shift lever knob (MTX).

c. Shift panel.

d. Upper panel.

e. Rear console.

5. Set the parking brake lever out of the way..

6. Disconnect the connectors.


7. Remove the bolts.

8. Remove the SAS control module.

9. Install in the reverse order of removal.

10. Switch the ignition ON (engine off or on).

11. Verify that the air bag system warning light illuminates for approx. 6 s

and goes out.

12. Perform the DSC sensor initialization procedures..

NOTE:

Sas Control Module Configuration (Using Read/Write Function) [Standard Deployment Control System]
NOTE: When performing configuration, it is necessary to read the vehicle specification information from the SAS control module before replacing it. Connect the M-MDS to the vehicle and p ...

Sas Control Module [Standard Deployment Control System]
Purpose The SAS control module controls the air bag system operation. Function During a frontal collision, the SAS control module controls the following air bag module operation ...

Other materials:

Rear Door Trim Removal/Installation
1. Insert a tape-wrapped flathead screwdriver in the position indicated by the arrow (1) in the figure and remove the inner handle cover while detach tabs A, pin B. 2. Remove the screw C. 3. Remove the cover D, then remove the screw E. 4. Take the shaded area shown in the figur ...

Front Fog Lights Indicator Light
Purpose Notifies the user that the front fog lights are illuminated. Function Illuminates when the front fog light illumination conditions are met. Construction Displayed in the instrument cluster. Operation 1. With the light switch in the TNS, HEAD, or ...

Magnet Clutch [Manual Air Conditioner]
Purpose The magnetic clutch transmits the rotation force from the engine to the shaft in the A/C compressor. Function The magnetic clutch engages or disengages the magnetic clutch and the A/C turns on or off by switching the power transmission from the engine. Con ...

© 2016-2022 Copyright www.mcx5.org