Mazda CX-5 Service & Repair Manual: Resistor [Manual Air Conditioner]
Purpose
-
The resistor controls the blower motor rotation speed.
Function
-
The resistor controls the supply voltage to the blower motor according to the fan switch operation, and adjusts the fan rotation speed (airflow volume).
Construction
-
The resistor is installed to the A/C unit.
-
A thin, card-type resistor has been adopted for weight reduction.
Operation
1. When the fan switch speed is set at 1, the resistor internal resistance increases and the blower motor applied voltage decreases. Therefore, the blower motor rotation speed decreases.
2. The resistor internal resistance decreases as the voltage applied to the blower motor by the fan switch increases in speed to 2, 3, and 4. Therefore, the blower motor rotation speed increases.
Fail-safe
-
Function not equipped.
Resistor Removal/Installation [Manual Air Conditioner]
NOTE:
When removing the resistor, perform the procedure in the posture shown in
the figure.
1. Disconnect the negative battery cable..
2. Remove the dashboard under cover..
...
Solar Radiation Sensor Inspection [Full Auto Air Conditioner]
1. Shine a fluorescent light or expose the solar radiation sensor to natural
sunlight.
2. Connect the positive (+) lead to terminals B, C and negative (-) lead to terminal
A of the solar radiati ...
Other materials:
Oil Pump
Outline
The oil pump has a mechanism for feedback control of oil pressure. As a result,
an oil pressure increase of more than the set pressure is suppressed and oil
pump drive resistance is reduced. In addition, because the set pressure can
be changed (oil pressure two-step control) ...
Instrument Cluster Disassembly/Assembly
CAUTION:
If the instrument cluster is hit forcefully during disassembly such as by
being dropped, it could get damaged and the system may not operate normally.
When disassembling the instrument cluster, perform the procedure on a workbench
on clean clothes being careful not to drop ...
Exhaust System
Purpose, Outline
A 4-2-1 exhaust system has been adopted which reduces residual gas in the
cylinders using the scavenging effect and contributes to a high compression
ratio.
The loop structure of the exhaust pipes for the 4-2-1 system takes up less
space.
Structural Vie ...
