Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Resistor Inspection [Manual Air Conditioner]

Mazda CX-5 Service & Repair Manual / HVAC / A/C / Resistor Inspection [Manual Air Conditioner]

1. Verify that the resistance between the resistor terminals is as shown in the table.



Terminal

Resistance (ohm)

A—D

0.35—0.41

A—B

0.95—1.09

A—C

2.68—3.08


Refrigerant System Service Warnings
Handling Refrigerant Avoid breathing air conditioning refrigerant or lubricant vapor. Exposure may irritate eyes, nose and throat. Also, due to environmental concerns, we urge use of reco ...

Resistor Removal/Installation [Manual Air Conditioner]
NOTE: When removing the resistor, perform the procedure in the posture shown in the figure. 1. Disconnect the negative battery cable.. 2. Remove the dashboard under cover.. ...

Other materials:

Clock Spring Inspection [Standard Deployment Control System]
1. Disconnect the negative battery cable and wait for 1 min or more.. 2. Remove the driver?side air bag module.. 3. Remove the steering wheel.. 4. Remove the column cover.. 5. Remove the clock spring.. 6. Verify that the continuity is as indicated in the table. If not as indicated ...

Hydraulic Pressure Control System Outline [Fw6 A EL, Fw6 Ax EL]
Outline The hydraulic control mechanism consists of an oil cooler which maintains the hydraulic pressure at the optimum temperature, a control valve body and each shift valve which perform adjustment and circuit switching of the hydraulic pressure based on the control content calcula ...

Rear Stabilizer Control Link Inspection
1. Remove the rear stabilizer control link.. 2. Inspect for bending or damage. If there is any malfunction, replace the rear stabilizer control link. 3. Rotate the ball joint stud 10 times and shake it side to side 10 times. 4. Measure the ball-joint rotational torque using an Allen wrench ...

© 2016-2022 Copyright www.mcx5.org