Purpose/ Function
The reduction gear transmits the rotation input from the EPS motor, decreasing the rotation speed and increasing the torque simultaneously.
Construction
The reduction gear consists of the worm wheel located on the steering column main shaft and the worm shaft connected to the EPS motor, and is integrated with the steering column.
Operation
The assist torque generated by the EPS motor is transmitted to the worm wheel via the worm shaft drives the steering column main shaft.
The assist torque from the EPS motor is amplified by the reduction ratio (20.33:1) between the worm shaft and worm wheel, and is transmitted to the steering column main shaft.
Powertrain System [C66 M R]
Purpose, Function
The powertrain mechanism changes the gear combination by engaging or releasing
the clutch hub and gear, and changes the power transmission route. Because of
the change in the power transmission route, the drive force (speed, torque,
rotation direction) input from th ...
Wiper/Washer System
Outline
The following wiper/washer system has been adopted.
Windshield wiper system
Rear wiper system
Auto wiper system (with auto wiper system)
Washer fluid-level sensor (with washer fluid-level sensor)
Specification
Windshiel ...
Auto Light System
Outline
The auto light system automatically turns the TNS and headlights on/off according
to the illumination level above and in front of the vehicle.
The auto light system is controlled by the front body control module (FBCM).
The front body control module (FBCM) performs ...