Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Rear Window Defroster/Outer Mirror Heater

Mazda CX-5 Service & Repair Manual / HVAC / General / Rear Window Defroster/Outer Mirror Heater

Outline

Structural view


System wiring diagram

Vehicles with full-auto air conditioner system


Vehicles with manual air conditioner system


Construction

Rear window defroster

Heated outer mirror

Operation

Vehicles with full-auto air conditioner system

1. When the rear window defroster switch on the climate control unit is turned on (1), an ON/OFF control request signal is sent to the front body control module (FBCM) through the instrument cluster as a CAN signal.(2)

2. When the front body control module (FBCM) receives the ON/OFF control request signal, it supplies the battery voltage to the rear window defroster relay.(3)

3. When the battery voltage is supplied to the rear window defroster relay, a switch inside the rear window defroster relay is turned on.(4)

4. When the switch inside the rear window defroster relay is turned on, the battery voltage is supplied to the rear window defroster/heated outer mirrors to operate them.(5)


Vehicles with manual air conditioner system

1. When the rear window defroster switch on the climate control unit is turned on (1), a signal is sent from the climate control unit to the front body control module (FBCM) and the battery voltage is supplied to the rear window defroster relay.(2)

2. When the battery voltage is supplied to the rear window defroster relay, a switch inside the rear window defroster relay is turned on.(3)

3. When the switch inside the rear window defroster relay is turned on, the battery voltage is supplied to the rear window defroster/heated outer mirrors to operate them.(4)


Fail-safe

Rear Heat Duct Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Decoration panel. b. Shift lever knob (MTX). c. Front console box. d. Shift panel. e. Upper panel. f. Rear co ...

A/C
...

Other materials:

Lights On Indicator Light
Purpose Notifies the user that the TNS or the headlights (LO) are on. Function Illuminates when the illumination conditions for the TNS, headlights (LO), or parking lights are met. When the instrument cluster receives the TNS malfunction signal sent via CAN communic ...

Instrument Cluster
Outline The instrument cluster centrally controls the speedometer, tachometer, odometer/tachometer, fuel gauge, warning/indicator lights, trip computer, warning sounds and panel lights. Function The instrument cluster displays the following information to notify the user ...

Electric Power Steering (Eps) Control Module
Purpose/ Function The EPS control module (CM) calculates the optimum assist current based on the steering torque signal from the torque sensor installed to the steering column and the vehicle speed signal sent via CAN transmission from the PCM. The EPS CM controls the following ...

© 2016-2024 Copyright www.mcx5.org