Mazda CX-5 Service & Repair Manual: Rear Suspension

Wheel Hub, Steering Knuckle Removal/Installation

CAUTION: Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if it is pulled by mistake. Befo ...

Rear Axle

Purpose, Function An angular ball bearing, with a low rotational resistance, has been adopted, improving driveability. A unit bearing that does not require pre-load setting has bee ...

Other materials:

Automatic Transaxle Warning Light [Fw6 A EL, Fw6 Ax EL]
Purpose/Function The automatic transaxle warning light illuminates when the transaxle has malfunction. Construction The automatic transaxle warning light is built into the instrument cluster. Operation If the transmission has a malfunction, the TCM sends an ...

DSC Related Parts Sensor Initialization Procedure
WARNING: If the initialization procedure is not completed, the DSC will not operate properly and it might cause an unexpected accident. Therefore, after replacing or removing the DSC HU/CM or SAS control module, make sure to perform the initialization procedure to insure proper DSC ...

Manual Transaxle Operation
Manual Transaxle Shift Pattern The shift pattern of the transaxle is conventional, as shown. Depress the clutch pedal all the way down while shifting; then release it slowly. Your vehicle is equipped with a device to prevent shifting to R (reverse) by mistake. Push the shift lever downward a ...