Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Rear Door Hinge Removal/Installation

Mazda CX-5 Service & Repair Manual / Body / Doors/Lids & Hood/Trunk / Rear Door Hinge Removal/Installation

1. Disconnect the negative battery cable..

2. Remove the following parts:

a. Rear door.

b. Front scuff plate.

c. Rear scuff plate.

d. B-pillar lower trim.

3. Remove in the order shown in the figure.



1

Bolt

2

Nut

3

Rear door hinge


4. Install in the reverse order of removal.

Rear Door Garnish Removal/Installation
WARNING: Using a utility knife with bare hands can cause injury. Always wear gloves when using a utility knife. Front 1. Using a tape-wrapped fastener remover, remove clips A in the ...

Rear Door Latch And Lock Actuator Inspection
The following actuator and switch are integrated with the rear door latch and lock actuator. From the actuator/switch name and operation in the following table, select the actu ...

Other materials:

Keyless Warning Alarm
Purpose The keyless warning alarm notifies the driver that the remote transmitter cannot be verified or the steering lock cannot be released. Function When the instrument cluster receives the keyless warning alarm request signal sent from the start stop unit via the CAN sig ...

Air Bag Module And Pre Tensioner Seat Belt Disposal Procedures [Standard Deployment Control System]
WARNING: A live (undeployed) air bag module or pre-tensioner seat belt may accidentally operate (deploy) when it is disposed of and cause serious injury. Always refer to the “AIR BAG MODULE AND PRE-TENSIONER SEAT BELT DEPLOYMENT PROCEDURES” and dispose of air bag modules and pre ...

Tcs/DSC Indicator Light
Purpose/Function The TCS/DSC indicator light, built into the instrument cluster, informs the driver of the following vehicle conditions. TCS is operating. (Drive wheel is slipping.) DSC is operating. (Vehicle side-slip condition.) Roll over mitigation (RO ...

© 2016-2024 Copyright www.mcx5.org