Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Rear Combination Light

Purpose

Function


Operation switch

Related light

Operation condition

Light switch (TNS)

Taillight

Turns on

Rear side marker light

Turns on

Brake switch

Brake light

Turns on

Turn switch

Rear turn light

Flashes

Hazard warning switch


Construction


Operation

Taillights

1. When the light switch is operated to the TNS position, a TNS signal is input to the start stop unit.

2. The start stop unit sends the TNS signal to the front body control module (FBCM).

3. When the front body control module (FBCM) receives the TNS signal. it turns the TNS relay on.

4. When the TNS relay turns on, the taillight bulbs are illuminated.


Brake lights

1. When the brake pedal is depressed, the brake light switch turns on.

2. When the brake light switch turns on, the brake lights are illuminated.


Rear turn lights (turn)

1. When the turn switch is operated to the RH position, a turn RH signal is input to the start stop unit.

2. When the turn switch is operated to the LH position, a turn LH signal is input to the start stop unit.

3. The start stop unit sends the turn RH or LH signal to the front body control module (FBCM).

4. When the front body control module (FBCM) receives the turn RH signal, the rear turn light (RH) flashes.

5. When the front body control module (FBCM) receives the turn LH signal, the rear turn light (LH) flashes.


Rear turn lights (hazard warning)

1. When the hazard warning switch is turned on, a hazard signal is input to the start stop unit.

2. The start stop unit sends a hazard warning signal to the front body control module (FBCM).

3. When the front body control module (FBCM) receives the hazard warning signal, the rear turn lights (RH) and (LH) flash.


Rear side marker lights

1. When the light switch is operated to the TNS position, a TNS signal is input to the start stop unit.

2. The start stop unit sends the TNS signal to the front body control module (FBCM).

3. When the front body control module (FBCM) receives the TNS signal. it turns the TNS relay on.

4. When the TNS relay turns on, the rear side marker lights are illuminated.


Fail-safe

PID/Data Monitor Inspection [Adaptive Front Lighting System (Afs)]
1. Connect the M-MDS to the DLC-2. 2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS. a. Select “DataLogger”. b. Select “Modulesâ ...

Rear Combination Light Removal/Installation
NOTE: Fogging or condensation on the inside of the rear combination lights may occur due to a natural phenomenon occurring as a result of a temperature difference between the interior an ...

Other materials:

Engine Mount
Purpose, Function The engine mount secures the engine and transaxle to the vehicle body, reducing vibration and noise. Construction The three points at the engine front (No.3 engine mount), one side of the transaxle (No.1 engine mount), and the rear upper part of the transa ...

Climate Control Unit Removal/Installation [Full Auto Air Conditioner]
NOTE: The climate control unit prior to replacement stores the vehicle specification information. The new climate control unit does not store any vehicle specification information. When the ignition is switched ON after the climate control unit is replaced, the climate ...

Audio Set (Type B)
CAUTION Do not press the panel strongly or press it with a sharp-pointed object. Otherwise, the panel could be damaged. 1 Power/Volume/Display/Sound Controls 2 Operating the Radio 3 Operating the Satellite Radio 4 Operating the Compact Disc (CD) Player 5 How to use the Auxiliary jack/U ...

© 2016-2026 Copyright www.mcx5.org