Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Radiator Removal/Installation

Mazda CX-5 Service & Repair Manual / Engine / Cooling / Radiator Removal/Installation

WARNING:

1. Disconnect the negative battery cable..

2. Remove the front under cover No.1..

3. Drain the engine coolant..

4. Remove the plug hole plate..

5. Remove the air cleaner, air hose and fresh air duct component..

6. Remove the coolant reserve tank..

7. Remove the cooling fan component..

8. Remove in the order indicated in the table.

9. Install in the reverse order of removal.

10. Refill the engine coolant..

11. Inspect for engine coolant leakage..



1

Lower radiator hose

2

Upper mount rubber bracket

(See Upper Mount Rubber Bracket Removal Note.)

3

Radiator

(See Radiator Removal Note.)


Upper Mount Rubber Bracket Removal Note

CAUTION:

1. While pressing down the upper mount rubber bracket tab lightly in the direction of the arrow shown in the figure, pull out the upper mount rubber bracket toward the vehicle rear.


2. Remove the upper mount rubber bracket.

Radiator Removal Note

1. To prevent damage to the radiator core, protect it by covering the radiator surface with cardboard.

2. Lift the radiator and remove it from the radiator installation holes on the shroud panel.

3. Move the radiator and condenser to the engine side.

4. Remove the two bolts (lower side) which secure the condenser to the radiator.


5. Remove the two bolts (upper side) which secure the condenser to the radiator.


6. Remove the radiator from above the engine compartment.

Low Engine Coolant Temperature Indicator Light (Blue)/High Engine Coolant Temperature Warning Light (Red)
Purpose Low engine coolant temperature indicator light (blue) The low engine coolant temperature indicator light (blue) notifies the driver that the engine coolant temperature is low and va ...

Radiator
Purpose, Function The radiator disperses the engine coolant heat flowing internally by receiving against the vehicle while it is driven or air flow produced by the cooling fan. Constru ...

Other materials:

Winter Driving
Carry emergency gear, including tire chains, window scraper, flares, a small shovel, jumper cables, and a small bag of sand or salt. Ask an Authorized Mazda Dealer to perform the following precautions: l Have the proper ratio of antifreeze in the radiator. • Inspect the battery and its cable ...

Barometric Pressure (Baro) Sensor
Purpose/Function Detects the BARO as basic information for mainly determining the fuel injection amount. Detects the BARO and inputs it to the PCM as a BARO signal. Construction Built into the PCM. A piezoelectric element has been adopted for detecting th ...

Electrical Fan Control [Skyactiv G 2.0]
Outline Through cooling of the radiator and condenser by operation of the cooling fan according to vehicle conditions, engine reliability and cooling performance have been improved. Block Diagram Operation The PCM determines the demand airflow volume by the following c ...

© 2016-2024 Copyright www.mcx5.org