Purpose, Function
Introduces evaporative gas absorbed by the charcoal canister to the intake manifold.
The purge solenoid valve opens according to the control signal from the PCM.
Construction
The purge solenoid valve is installed in the engine compartment.
The purge solenoid valve consists of a coil, spring, and plunger.
Operation
According to the control signal from the PCM, the coil is energized and the plunger is operated to open/close the purge solenoid valve.
When the purge solenoid valve is open, evaporative gas flows from the charcoal canister to the intake manifold side.
Purge solenoid valve open/closed view
For evaporative purge control details, refer to CONTROL SYSTEM..
Fail-safe
Function not equipped.
Turn And Hazard Indicator Alarm
Purpose
The turn and hazard indicator alarm notifies the driver that a turn light
or the hazard warning lights are flashing.
Function
When the instrument cluster receives the turn signal/hazard warning indicator
light illumination request signal sent from the front body con ...
Hood Removal/Installation
WARNING:
Removing the hood without supporting it could cause the hood to fall and
cause serious injury. Always perform the procedure with at least another person
to prevent the hood from falling.
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Fro ...
Fuel Gauge Sender Unit Removal/Installation [Awd]
WARNING:
Always keep sparks and flames away from fuel when servicing the fuel system.
Fuel can be easily ignited which could cause serious injury or death, and damage
to equipment.
Fuel line spills and leakage from the pressurized fuel system are dangerous.
Fuel can ignite a ...