Purpose
Each door glass except for the driver-side can be opened/closed with occupant seated in the cabin using the power window subswitch.
Function
Manual switch
The power window subswitch switches the contact point according to the switch operation and switches the circuit to the power window motor.
Construction
The power window subswitch is equipped on the front passenger side and the rear passenger sides.
Operation
Manual operation (Example: close operation)
1. When the power window subswitch is turned to the manual close position (1), a manual close signal is sent to the power window motor.(2)
Fail-safe
Function not equipped
Washer Nozzle
Purpose
The washer nozzle sprays the washer fluid sent from the washer motor to the
optimum positions on the windshield.
Construction
A ball-shaped spray orifice is set inside the washer nozzle which can be
adjusted up or down.
The washer nozzle is moved u ...
Condenser Removal/Installation
1. Disconnect the negative battery cable..
2. Discharge the refrigerant..
3. Remove the front under cover No.1..
4. Drain the engine coolant..
5. Remove the following parts:
a. Plug hole plate.
b. Air cleaner, air hose and fresh air duct component.
c. Coolant reserve tank.
d. Cooling ...
Exterior Care
The paintwork on your Mazda represents the latest technical developments in composition
and methods of application.
Environmental hazards, however, can harm the paint's protective properties, if
proper care is not taken.
Here are some examples of possible damage, with tips on how to preven ...