Mazda CX-5 Service & Repair Manual: Plastic Parts Heat Resisting Temperature [Plastic Body Parts]
|
Part Name |
Code |
Material Name |
Heat resisting Temperature°C{°F} |
|||
|
Windshield molding |
PVC |
POLYVINYLCHLORIDE |
95 {203} |
|||
|
Cowl grille |
PP |
POLYPROPYLENE |
95 {203} |
|||
|
Front combination light |
Lens |
PC |
POLYCARBONATE |
130 {266} |
||
|
Housing |
PP |
POLYPROPYLENE |
90 {194} |
|||
|
Front bumper |
PP |
POLYPROPYLENE |
100 {212} |
|||
|
Front side turn light |
Lens |
PMMA |
ACRYLIC |
75 {167} |
||
|
Housing |
PC-PBT |
POLYCARBONATE-PBT |
80 {176} |
|||
|
Out side mirror |
Panel |
ABS |
ABS |
100 {212} |
||
|
Visor |
ABS |
ABS |
100 {212} |
|||
|
Outer cover |
ABS |
ABS |
100 {212} |
|||
|
Side step molding |
PP |
POLYPROPYLENE |
75 {167} |
|||
|
Roof molding |
PVC |
POLYVINYLCHLORIDE |
95 {203} |
|||
|
Rear bumper |
PP |
POLYPROPYLENE |
100 {212} |
|||
|
Rear combination light |
Lens |
PMMA |
ACRYLIC |
80 {176} |
||
|
Housing |
AAS |
AAS |
70 {158} |
|||
|
Outer handle |
Lever |
PC-PBT |
POLYCARBONATE-PBT |
80 {176} |
||
|
Base |
PC-PET |
POLYCARBONATE-PET |
80 {176} |
|||
|
High-mount brake light |
Lens |
PMMA |
ACRYLIC |
80 {176} |
||
|
Housing |
ABS |
ABS |
100 {212} |
|||
|
Rear Spoiler |
PP |
POLYPROPYLENE |
90 {194} |
|||
|
Shroud panel |
PP |
POLYPROPYLENE |
100 {212} |
|||
NOTE:
-
The application of temperatures higher than heat resisting temperatures may result in part deformation.
Lower Panel Removal/Installation
Driver-side
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Driver-side front scuff plate.
b. Driver-side front side trim.
c. Switch panel.
d. Decoration panel. ...
Other materials:
Customer Assistance (U.S.A.)
Your complete and permanent satisfaction is our business. We are here to serve
you. All Authorized Mazda Dealers have the knowledge and the tools to keep your
Mazda vehicle in top condition.
If you have any questions or recommendations for improvement regarding the service
of your Mazda vehic ...
Side Member Removal [Panel Replacement]
Symbol Mark
Removal Procedure
1. Drill the 45 locations shown in the figure.
NOTE:
When drilling, do not drill a hole all the way through or there could be
a problem when installing the new part.
2. Remove the side member. ...
Front Fog Light Aiming
NOTE:
Perform front fog light aiming if any of the following work is performed.
Front fog light replacement
Work that can affect vehicle height such as suspension replacement or
removal/installation.
1. Empty the vehicle by having all occupants leave ...
