Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Oil Control Valve (OCV) Removal/Installation [Skyactiv G 2.0]

Mazda CX-5 Service & Repair Manual / Steering / Linkage, Power / Oil Control Valve (OCV) Removal/Installation [Skyactiv G 2.0]

WARNING:

1. Disconnect the negative battery cable..

2. Remove the plug hole plate..

3. Remove the ignition coil/ion sensors..

4. Remove the cylinder head cover..

5. Remove in the order indicated in the table.

6. Install in the reverse order of removal.



1

OCV installation bolt

2

OCV


Oil Control Valve (OCV) Inspection [Skyactiv G 2.0]
Coil Resistance Inspection 1. Disconnect the negative battery cable.. 2. Remove the plug hole plate.. 3. Disconnect the OCV connector. 4. Measure the resistance between terminals A and B using ...

Oil Control Valve (OCV) [Skyactiv G 2.0]
Purpose, Function The OCV switches the oil passage to the hydraulic variable valve timing actuator to control the opening/closing period of the exhaust valve. Construction The O ...

Other materials:

Oil Pressure Switch [Fw6 A EL, Fw6 Ax EL]
Purpose/Function The oil pressure switch detects the engagement pressures of the low clutch, 2-6 brake, R-3-5 brake, and the high clutch. The oil pressure switch signal is used for automatic shift control, manual shift control, TCC control, line pressure control, direct electric ...

Front Door Trim Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the inner garnish.. 3. Insert a tape-wrapped flathead screwdriver in the position indicated by the arrow (1) in the figure and remove the inner handle cover while detach tabs A, pin B. 4. Remove the screw C. 5. Remove the cover ...

Synchronizer Mechanism [C66 M R]
Purpose, Function For smooth gear changes, the synchronizer mechanism synchronizes the rotation of the engaging area and engages gears. Construction Detent ball-type synchronizer key A detent ball-type synchronizer key has been adopted for the synchronizer mechanism ex ...

© 2016-2022 Copyright www.mcx5.org