Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Oil Control Valve (OCV) Inspection [Skyactiv G 2.0]

Mazda CX-5 Service & Repair Manual / Steering / Linkage, Power / Oil Control Valve (OCV) Inspection [Skyactiv G 2.0]

Coil Resistance Inspection

1. Disconnect the negative battery cable..

2. Remove the plug hole plate..

3. Disconnect the OCV connector.

4. Measure the resistance between terminals A and B using an ohmmeter.


5. Install in the reverse order of removal.

Spool Valve Operation Inspection

1. Disconnect the negative battery cable..

2. Remove the OCV..

3. Verify that the spool valve in the OCV is in the maximum valve timing advance position as indicated in the figure.


4. Verify that the battery is fully charged..

NOTE:


5. Apply battery positive voltage between the OCV terminals and verify that the spool valve operates and moves to the maximum valve timing retard position.


6. Stop applying battery positive voltage and verify that the spool valve returns to the maximum valve timing advance position.

7. Install the OCV..

Eps Control Module Inspection
1. Remove the driver-side front scuff plate.. 2. Remove the driver-side front side trim.. 3. Remove the car-navigation unit (with car-navigation system).. 4. Remove the switch panel.. 5. Remov ...

Oil Control Valve (OCV) Removal/Installation [Skyactiv G 2.0]
WARNING: A hot engine can cause severe burns. Turn off the engine and wait until it is cool before servicing. 1. Disconnect the negative battery cable.. 2. Remove the plug hole plat ...

Other materials:

Turn Signal/Hazard Warning Indicator Lights
Purpose Notifies the driver that a turn light, the hazard warning lights are flashing. Function Flashes according to the turn switch and hazard warning switch operations. Construction Displayed in the instrument cluster. Operation Turn system 1. When th ...

Steering Features
Improved handling, fuel economy, marketability Column assist type Electric Power Steering (EPS) adopted Improved handling By using a higher steering gear ratio (15.5), the steerability has been improved ...

Cooling Fan Motor Removal/Installation
WARNING: Never remove the cooling system cap or loosen the radiator drain plug while the engine is running, or when the engine and radiator are hot. Scalding engine coolant and steam may shoot out and cause serious injury. It may also damage the engine and cooling system. Tu ...

© 2016-2022 Copyright www.mcx5.org