Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Not P Position Switch Inspection

NOTE:

1. Disconnect the negative battery cable..

2. Remove the front console..

3. Disconnect the selector lever component connector.


4. Verify that the continuity between selector lever component terminals B and I.


Not P position switch specification

Test condition

Continuity

Selector lever is in the P position.

No continuity

Selector lever is not in the P position.

Continuity


Neutral Switch Removal/Installation [C66 M R]
1. Disconnect the negative battery cable.. 2. Remove the air cleaner component. (ex: air cleaner, air hose). 3. Remove in the order indicated in the table. 4. Install in the reverse order of rem ...

Oil Pump Removal/Installation [Skyactiv G 2.0]
WARNING: Hot engines and engine oil can cause severe burns. Turn off the engine and wait until it and the engine oil have cooled. A vehicle that is lifted but not securely supported ...

Other materials:

Overheating
Overheating If the High engine coolant temperature warning light illuminates, the vehicle loses power, or you hear a loud knocking or pinging noise, the engine is probably too hot. WARNING Switch the ignition to off and make sure the fan is not running before attempting to work near the c ...

Rain Sensor
Outline The rain sensor detects the amount of rainfall and calculates the wiper operation speed, and outputs a windshield wiper control signal to the front body control module (FBCM) to perform automatic wiper operation (auto wiper system) according to the amount of rainfall. ...

Charcoal Canister
Purpose, Function Absorbs evaporative gas flowing from the fuel tank to prevent release of the gas into the atmosphere. Construction The charcoal canister is installed near the fuel tank. U.S.A. and CANADA Except U.S.A. and CANADA The charcoal canister ...

© 2016-2022 Copyright www.mcx5.org