Mazda CX-5 Service & Repair Manual: Mass Air Flow (MAF) Sensor

Mazda CX-5 Service & Repair Manual / Engine / Intake / Mass Air Flow (MAF) Sensor

Purpose/Function

Detects the intake airflow amount introduced into the cylinder as basic information for mainly determining the fuel injection amount.
Detects the intake airflow amount introduced into the cylinder and inputs it to the PCM as an intake airflow amount signal.

Construction

Installed on the air cleaner.
A hot film has been adopted as the detecting element for detecting the intake airflow amount.
IAT sensor No.1 is integrated.

Operation

Inputs the signal, which fluctuates according to the intake airflow amount, to the PCM.

MAF sensor characteristic

Fail-safe


DTC No.	Fail-safe function
P0102:00	Restricts the upper limit of the engine speed. Inhibits the evaporative purge control.
P0103:00	Restricts the upper limit of the engine speed. Inhibits the evaporative purge control.

Mass Air Flow (MAF) Sensor Inspection

Visual Inspection 1. Remove the MAF sensor/IAT sensor No.1.. 2. Visually inspect the MAF sensor for the following: Damage, cracks, soiling Rusted sensor terminal Bent sensor ...

Mass Air Flow (MAF) Sensor/Intake Air Temperature (Iat) Sensor No.1 Removal/Installation

NOTE: Because the IAT sensor No.1 is integrated in the MAF sensor, replacing the IAT sensor No.1 includes replacement of the MAF sensor/IAT sensor No.1. 1. Disconnect the negative bat ...

Other materials:

Rear Stabilizer Removal/Installation [2 Wd]
WARNING: Verify that the rear crossmember is securely supported by a jack. If the rear crossmember falls off, it can cause serious injury or death, and damage to the vehicle. CAUTION: Performing the following procedures without first removing the rear ABS wheel-spee ...

Bsm Indicator Light Flashes While Not Under Bsm Indicator Light Flashing Conditions (No Combination Switch Operation (Turn Signal Switch)) [Blind Spot Monitoring (Bsm)]
Description BSM indicator light flashes while not under BSM indicator light-flashing conditions (no combination switch operation (turn signal switch) The BSM indicator light flashes despite not satisfying the BSM indicator light flashing ...

Exhaust Gas Purification System
Purpose, Outline Purifies contaminants (HC, CO, NOx) in the exhaust gas by utilizing the chemical reactions of the three-way catalytic converter. System Diagram Structure The exhaust gas purification system consists of the following parts: Par ...