1. Park the vehicle on level ground.
2. Remove the front under cover No.2..
3. Remove the oil level plug and gasket.
4. Verify that the manual transaxle oil is near the brim of the plug port.
When the manual transaxle oil level is lower than the lower limit, add manual transaxle oil.
API service GL-4
SAE 75W-80
5. Install a new gasket and the oil level plug.
39—59 N·m {4.0—6.0 kgf·m, 29—43 ft·lbf}
6. Install the front under cover No.2..
Clock
Purpose
The clock displays the current time, the passenger and rear seat belt status,
the passenger air bag deactivation (PAD) switch status, and the seat warmer
operation status to notify the user.
Function
Stores the time set by the user and displays the current time.
...
Hood
Purpose/Function
The hood is constructed with a large space between the front end of the hood
and the engine to absorb an impact.
Construction
The hood stiffener positioned at the front end of the hood is shaped so that
it collapses easily during an impact. In addition, the ...
Keyless Beeper Removal/Installation
1. Disconnect the negative battery cable..
2. Remove the cowl grille..
3. Disconnect the connector.
4. Pull the keyless buzzer in the direction of the arrow (2) shown in the figure
while pressing the keyless buzzer tab in the direction of the arrow (1) shown in
the figure, detach the k ...