Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Manual

Turbine/Input Shaft Speed Sensor, Output Shaft Speed Sensor [Fw6 A EL, Fw6 Ax EL]
Purpose/Function The turbine/input shaft speed sensor detects the rotation speed of the input shaft (low clutch drum). The output shaft speed sensor detects the rotation speed of the ...

Inspection After Manual Transaxle Overhaul [C66 M R]
1. After warming up the engine, drive the vehicle and inspect the following items: a. No abnormal noise in each shift position. b. Smooth shift operation when shifting gears. c. No gear slipout ...

Other materials:

Clutch Pipe And Hose Removal/Installation [C66 M R]
CAUTION: Do not allow clutch fluid to get on a painted surface. Clutch fluid contains properties which can dissolve the paint. If clutch fluid gets on a painted surface, wash it off with water immediately and wipe the area off completely. 1. Disconnect the negative battery cable. ...

Outer Mirror Glass Installation
1. Connect the mirror heater connectors. (with heated outer mirror) 2. Connect the blind spot monitoring (BSM) warning indicator light connector (with blind spot monitoring system). NOTE: Lightly pull the blind spot monitoring (BSM) warning indicator light connector and verify t ...

Propeller Shaft Inspection
1. Measure the propeller shaft center runout using the dial gauge. If it exceeds the maximum specification, replace the propeller shaft as a single component. Propeller shaft maximum runout 0.8 mm {0.031 in} 2. Inspect the play and rotation of the joint by turning ...

© 2016-2022 Copyright www.mcx5.org