Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Main Fuse

Purpose

Function

Construction

Operation

1. If electric current to each fuse is the specified value or more, the fuse melts due to heat generation.

2. Interrupts electric current flow downstream of the fuse.

Fail-safe

Fuse Block
Purpose Fuses used by each system are grouped and housed together for smooth inspection and replacement servicing. Function Fuses used by each system are grouped and housed toge ...

Main Fuse Removal/Installation
1. Disconnect the negative battery cable.. 2. Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure. 3. Move the flathead screwdriver in the di ...

Other materials:

Thermostat
Purpose, Function When the engine coolant temperature is low, the thermostat blocks the engine coolant passage between the radiator and engine. As a result, because engine coolant cycles without passing through the radiator, warming is promoted. Construction The thermostat ...

Antenna Feeder No.3 Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. B-pillar lower trim. b. Front seat belt adjusting cover. c. Front seat belt upper anchor installation bolt. d. B-pillar upper trim. e. Trunk board. f. Trunk end trim. g. Trunk side trim. h. D-pillar trim. ...

Air Filter
Purpose The air filter removes pollen and dust in the intake air and purifies air flowing into the cabin. Function The air filter removes pollen and dust using a dust collecting filter. Construction The air filter is installed to the blower unit. It ...

© 2016-2022 Copyright www.mcx5.org