Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Low Engine Coolant Temperature Indicator Light (Blue)/High Engine Coolant Temperature Warning Light (Red)

Mazda CX-5 Service & Repair Manual / Accessories / Storage / Low Engine Coolant Temperature Indicator Light (Blue)/High Engine Coolant Temperature Warning Light (Red)

Purpose

Low engine coolant temperature indicator light (blue)

High engine coolant temperature warning light (red)

Function

Low engine coolant temperature indicator light (blue)

High engine coolant temperature warning light (red)

Construction

Operation

Low engine coolant temperature indicator light (blue)

1. When the ignition is switched ON (while engine is running), the instrument cluster receives (1) the engine coolant temperature signal from the PCM via the CAN signal.

2. The instrument cluster turns the transistor on (2) based on the engine coolant temperature signal.

3. When the transistor turns on, the ground circuit of the low engine coolant temperature indicator light (blue) is established and the low engine coolant temperature indicator light (blue) illuminates (3).


High engine coolant temperature warning light (red)

1. When the ignition is switched ON (while engine is running), the instrument cluster receives (1) the engine coolant temperature signal from the PCM via the CAN signal.

2. The instrument cluster turns the transistor on (2) intermittently for flashing and continuously for illumination based on the engine coolant temperature signal.

3. The high engine coolant temperature warning light (red) flashes (3) when the transistor is turned on intermittently, and it illuminates (3) when the transistor is turned on continuously.


Fail-safe

Lights On Reminder Warning Alarm
Purpose The lights-on reminder warning alarm notifies the driver that the TNS and headlights are not turned off. Function The instrument cluster receives the following vehicle c ...

Low Fuel Warning Light
Purpose The low fuel warning light warns the driver that the remaining fuel level is low. Function The instrument cluster calculates the fuel quantity based on the following ...

Other materials:

Vanity Mirror Illumination Inspection
1. Disconnect the negative battery cable.. 2. Remove the sunvisor.. 3. Verify that the continuity between the vanity mirror illumination terminals is as indicated in the table. If not as indicated in the table, replace the sunvisor. ...

Front Combination Light Disassembly/Assembly
1. Disassemble in the order shown in the figure. Halogen type 1 Short cord (See Short Cord Removal Note.) 2 Parking/Front turn light bulb (See PARKING/FRONT TURN LIGHT BULB REMOVAL/INSTALLATION.) 3 Headlight ...

Washer Fluid Level Sensor
Purpose The washer fluid-level sensor illuminates the low washer fluid level warning light when the washer fluid level is lowered. Function The washer fluid-level sensor detects the decrease in the washer fluid level. Construction The washer fluid-level sensor con ...

© 2016-2022 Copyright www.mcx5.org