Mazda CX-5 Service & Repair Manual: Lighting System Personalization Features Setting Procedure
Turn Light System
-
There are two methods for personalizing the turn light system: One using the M-MDS and the other using the audio unit (with color LCD). Refer to the following and perform the setting.
-
CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE
-
AUDIO UNIT PERSONALIZATION FEATURES SETTING PROCEDURE
-
Method using M-MDS
-
Using audio unit (with color LCD)
Auto Light System
-
There are two methods for personalizing the auto light system: One using the M-MDS and the other using the audio unit (with color LCD). Refer to the following and perform the setting.
-
CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE
-
AUDIO UNIT PERSONALIZATION FEATURES SETTING PROCEDURE
-
Method using M-MDS
-
Using audio unit (with color LCD)
Auto Light-OFF System
-
There are two methods for personalizing the auto light-Off system: One using the M-MDS and the other using the audio unit (with color LCD). Refer to the following and perform the setting.
-
CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE
-
AUDIO UNIT PERSONALIZATION FEATURES SETTING PROCEDURE
-
Method using M-MDS
-
Using audio unit (with color LCD)
Room light control system
-
There are two methods for personalizing the interior light control system: One using the M-MDS and the other using the audio unit (with color LCD). Refer to the following and perform the setting.
-
CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE
-
AUDIO UNIT PERSONALIZATION FEATURES SETTING PROCEDURE
-
Method using M-MDS
-
Using audio unit (with color LCD)
Lighting System Personalization
A personalization function has been adopted with which settings for each
function can be changed.
The following settings for the auto light system and interior light control
system ...
Lighting Systems
Outline
Front combination lights have been adopted with parts related to the front
exterior lights grouped and housed together.
The following systems have been adopted to the headlig ...
Other materials:
Drive Belt Auto Tensioner Inspection
WARNING:
A hot engine can cause severe burns. Turn off the engine and wait until it
is cool before servicing.
CAUTION:
If the rubber part of the drive belt auto tensioner is damaged by a screwdriver
or other tool, oil in the hydraulic pressure unit could leak and the tens ...
Clutch Pedal Position (CPP) Switch Inspection [Skyactiv G 2.0]
Continuity Inspection
1. Verify that the CPP switch is installed properly..
2. Disconnect the negative battery cable..
3. Disconnect the CPP switch connector.
4. Verify that the continuity between CPP switch terminals A and B when the clutch
pedal is depressed and when it is released is acc ...
Rear Console Disassembly/Assembly
1. Disassemble in the order indicated in the table.
1
Screw A
2
Rear console bracket
3
Screw B
4
Side panel
5
Rear console box
6
U ...
